User Maintenance
Cleaning the scan window is the only maintenance
that is required.
♦
Do not allow any abrasive material to touch
the window.
♦
Remove any dirt particles with a damp
cloth.
♦
Clean the scan window using a soft cloth or
a cotton tipped swab moistened with water.
♦
Do not remove the nose of the scanner.
FCC Information
This equipment has been tested and is found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This
equipment generates, uses, and can radiate RF
energy and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communication. Operation of
this equipment in a residential area is likely to cause
harmful interference, in which case the user will be
required to correct the interference at their own
expense.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
users authority to operate this equipment.
Warranty
This scanner is guaranteed for a period of five (5)
years from date of shipment from Opticon, including
all defects in material and workmanship for the first
year and electronics only thereafter. Opticon will, at
its option, repair or replace products that prove to
be defective in material or workmanship under
proper use within the warranty period. Opticon will
consider any product out-of-warranty if the unit has
been subjected to misuse, accident or incorrect
installation. No other warranties are expressed or
implied, including but not limited to the implied
warranties of merchantability and fitness for a
particular purpose. Opticon is not liable for conse-
quential damages.
If the scanner must be returned, please contact
Opticon to obtain an RMA (Return Merchandise
Authorization) number prior to returning the
product. The Customer Service Dept. may be
reached at 800-636-0090.
NOTE: Returned merchandise will NOT be accepted
without a RMA number indicated clearly on the
outside of the carton.
Technical Support
Opticons experienced technical staff are available
during regular business hours to answer questions
and assist you in every way possible in support of
our products, at (800) 636-0090.
When calling Opticon Technical Support, please
have the unit model number and several bar code
labels readily at hand. The model number is located
near the connector end of the cable.
8 Olympic Drive
Orangeburg, NY 10962
Tel 845.365.0090
Fax 845.365.1251
Quick Start
Guide
Handheld CCD Scanner
with USB Interface
25-USBQSTART-01
8 Olympic Drive
Orangeburg, NY 10962
Tel 845.365.0090
Fax 845.365.1251
www.opticonUSA.com
