- 5 -
Installation
Important: Please keep the installation procedure below. Improper or no operation may result
if the start-up sequence is not followed correctly.
Note
: If you change a source to another source such as PC, Camcorder, DVD Player or Blu-ray
player, you have to reset the power of all TXs and RXs by re-plugging of the +5V power
adaptor.
Step 1
Carefully unpack the contents of the shipping group.
Step 2
Connect HDWX-100-T to the HDMI source by supplied HDMI cable.
Step 3
Turn on the HDMI source and display.
Step 4 (Option for remote keyboard and mouse control)
Connect mini USB port in HDWX-100-T to USB port in PC with USB cable.
Step 5
Plug the +5V power adaptor to HDWX-100-T. Ensure the Power LED ON (Blue).
Step 6
Connect the HDWX-100-R to the HDMI displays by supplied HDMI cable.
Step 7 (In case of remote keyboard and mouse control)
Connect mouse and keyboard to two (2) USB ports in HDWX-100-R.
Step 8
Plug the +5V power adaptor to HDWX-100-T. Ensure the Power LED ON (Blue).
Fig. 1: Configuration of Transmitter, HDWX-100-T
