OPTICAL SYSTEMS DESIGN
DOC ID: 10119601
OSD2184P OPERATOR MANUAL
PAGE 17
2.2.7
CONTROLS
The OSD2184P/PW has a number of control functions: a 3-Way DIP Switch, Erase/Restore push
button and a PoE Mode push button.
FIGURE 8: CONTROLS
3-Way DIP Switch
THE 3-WAY DIP SWITCH IS USED TO CONTROL A NUMBER OF FUNCTIONS.
Figure 8 outlines the function of each switch. For correct operation, set the required switch settings
before powering the unit.
TABLE 6: 3-WAY DIP SWITCH SETTINGS
SWITCH
NUMBER
DESCRIPTION
SWITCH
POSITION
FUNCTION
1
Function
OFF
User Mode*
ON
Programming Mode
2
Optical Port Speed
OFF
1000BASE-X*
ON
100BASE-X
3
CTRL
OFF
PoE Disabled
ON
PoE Enabled*
*
Default settings
.
ERASE/RESTORE Push Button
The ERASE/RESTORE push button erases most recent IP configuration settings and resets the unit to
Factory Default Setting
•
Ensure DIP switch 1 is in “Default” mode (OFF position) and the unit is off (not powered)
when performing reset.
•
Press and hold the Reset button for 10 seconds and power up the unit.
•
Wait for unit to restart.
•
The factory default setting is now restored. The IP address is set to 192.168.0.99.
ON Position
OFF Position
1 2 3
Function
Optical Port Speed
Control
PoE Mode
Erase Restore