OPTICAL SYSTEMS DESIGN
DOC ID: 10116001
OSD2054P OPERATOR MANUAL
PAGE 6
1.3
TECHNICAL SPECIFICATIONS
TABLE 1: TECHNICAL SPECIFICATIONS
SPECIFICATION
PERFORMANCE
Electrical Data Interface
IEEE802.3 Ethernet
Electrical Data Rate
10/100Mbps
Operating Mode
Half or Full Duplex
Data Connector
RJ45, the PoE unit mounted on the front panel and the non-PoE unit on the rear
panel
PoE
IEEE802.3af
Operating Modes
Alternative B (pins 4/5 and 7/8)
Optical Interface
100Base-Fx/Sx
Optical Port Connector
SFP (LC connectors for 2-fiber operation and SC for 1-fiber operation)
SFP Options
Short haul, long haul, single fiber operation, etc
Please consult OSD datasheet #1021000XX or contact OSD
Transmit Optical Power
-15 to -8dBm into singlemode fiber (See SFP datasheet for details)
Receiver Sensitivity
<-33dBm
Receiver Saturation
>-3dBm
Standard Optical Link Budget
>18: >10km on multimode fiber @1310nm
> 40km on singlemode fiber @ 1310nm
> 160km possible on singlemode fiber with optional SFP
Operating Temperature
-20
°
C to +75
°
C
Relative Humidity
0 to 95% non-condensing
Power Requirements
+10V
DC
to +36V
DC
@ 3W plus an extra 20VA for PoE operation (Attached
powered device dependent). Use of isolated power supply is recommended
Power Connector
3.5mm 2-Way Terminal Block on the module
Dimensions (mm)
90W x 58D x 49H
Weight (kg)
0.4
1022054P05