6212A Manual Version 14.56.docx
Page 31 of 58
Start
Selecting “Start” from the Run Menu starts the Lasercheck and the graph begins displaying roughness
information. A graph of roughness vs. reading number will begin appearing in real time on the screen. In
addition, statistics of all measurements will be displayed digitally in real time at the top left and right corners of
the graph, and the current measurement in the top center of the graph.
Stop
While the roughness display is running, the Stop menu selection can be used to stop the data acquisition.
Selecting Start will restart the display. The “Stop / Start” cycle can be repeated as many times as is necessary for
the measurement set.
Sequence
While the roughness display is running, the Sequence menu selection can be used to restart the data acquisition.
All previous values on the screen will be discarded and an empty graph will be presented as the measurements
resume.
Save
The Save menu selection will provide a Windows “Save As” dialog box prompting the user to enter a filename to
save the data. Lasercheck software automatically attaches a Lasercheck “.LSC” data file extension to the file