6212A Manual Version 14.56.docx
Page 17 of 58
Scrolling to highlight “Y” and pushing the Select push button, will delete all data files, then the system will return
to the File System Window. Scrolling to highlight “N” and pushing the Select push button will return to the File
System Window without deleting files.
Reset Command
This selection should only be used if the user experiences difficulties with files and software in the controller.
Scroll to FILES: >Delete on the control box with the scroll (>) push button and push the Select push button. The
LCD displays the following screen.
Scrolling to highlight “Y” and pushing the Select push button will present the following display:
Scrolling to highlight “Y” and pushing the Select push button will delete data, configuration, and setup files that
have been added to the control box and return it to factory setups and configurations.
Exit Command
This selection exits the file management section of the system and returns to the Main Screen.
Delete all data
files? >n/Y
Reset to factory
files? >y/N
ALL data will be
deleted! >y/N