Chapter 1
•
Connecting MGW x100
32 Connecting MGW x100
Connecting MGW x100
You have to connect certain components to one another and to networks. To
do so, follow the instructions below.
Connecting MGW 1100 to the Power Supply
y
AC Platform.
Use a UL listed power cord and connect it to the power
connector on MGW 1100's rear panel. MGW 1100 does not ship with a
power cord. You will have to purchase a power cord that fits your local
Din socket.
y
Dual DC Platform
. Use AWG12 copper conductors and connect Plus,
Minus and Ground to the connectors l, - and GND respectively
on MGW 1100's rear panel.
If you connect both DC inputs to separate DC sources, the second DC
source takes over if the first one fails.
y
System Ground.
Use an AWG12 copper conductor and attach it to one
of the System Ground studs on the bottom of MGW 1100's rear panel.
The System Ground studs are labeled with
.
Connecting Host Controllers with Switches
y
The host controller connects to the switch internally.
StockCheck.com