background image

Wireless Video Intercom

IVP-DU (Door Camera Unit)

Installation Instructions

The performance of the system may be affected when mounting the unit in the 

following environments.

 - Places that are constantly experiencing vibrations or shocks.

 - Near a source of hydrosulfuric fumes, phosphorus fumes, ammonia, sulphur,

   carbon dust and any acidic or noxious materials.

 - An enclosed space that may cause sounds to echo 

 - Where rain or water may directly hit the unit.

Please also note that the video image may be seriously impaired where the camera

faces directly into the sun, and also in the following situations.

Location where the background is primarily occupied by the sky, such as in

the upper floor of an apartment building.
Location which has an adjacent white wall that will directly reflect sunlight.
Location that receives direct bright sunlight.

IVP-DU features

Adjustable Camera Angle

Battery Operation Capability (for 1 year*1)

Auto Day(Color) / Night(IR) Vision

Max 2 Units in a System

Fluorescent Push Button

AC/DC (10~24V) Adaptable

Splash Proof for Rain and Outdoor Condition*2

*1 calculation based on operations for 10sec times 3 activations per a day

*2 IPX4  Operating Temparature  -20 to 50 degC (-4 F to 122 degF)

IMPORTANT NOTICE

1.

PARTS IDENTIFICATION

2.

Operations under harsh environments such as out of warranted temperature, 

rapid temperature change, high humidity, constant moisturization may cause the

unit to malfunction.

Electronic device such as TVs, Radios, PCs, Microwave ovens or any other device

with an electric motor may cause the unit to malfunction.

Impact or shocks can cause severe damage to the unit. Please handle the unit

with care and operate without exerting strong forces.

Transmission range of communication between units may decrease under

the following conditions. 

- Any unit is installed on a metal surface.

- Presence of reinforced concrete, steel doors or other metal construction

  materials between units.

- Places near strong radio sources such as broadcast stations or substations.

Location of Installation is critical to optimize image quality captured by the unit.

Images will be impaired if the ambient backlight is very strong. 

Please study the installation environment according to this installation instruction.

- The video image is displayed in color during daytime or in well-lit area, but it is 

  displayed in black and white at night or in a dark area.

Old  and  new  batteries  may not be mixed. Do not use lithium batteries 

for IVP-DU.  Leakage  or possible explosion can occur.

- When Door Camera Unit Low Battery Indicator blinks on HU1, 

  please replace batteries. 

CHOOSING LOCATION

3.

Cable Hole

Screws & Anchors

Wall Mounting Base

Battery Cover

3-1

Places to Avoid

3-2

Position and Field of View

IVP-DU  (Door Camera Unit) should be mounted at a position where visitors or
potential trespassers can be captured in the camera’s field of view.  In a typical
setting, IVP-DU is positioned at height between 3.6 -5 feet off the ground.

Camera Angle Adjustment Lever can shift the camera’s  field of view 
max +/- 15 degrees to any combination of  vertical and horizontal directions.   

Knock Out

Remove the main unit from the mounting base

Open a screw cover

and loosen the screw.

Pull out the screw for 

a quarter of an inch 

(6mm)

.

Lift  the main unit 

from the mounting base.

Fix the mounting base on the wall at the height and location selected.

INSTALLATION

4.

4-1

Unit Preparation

4-2

Fixing the Base

Push Button

Camera Lens

Microphone

Speaker

Door Camera Unit (Front)

Camera Angle

Adjustment Lever

Battery

Compartment

Pairing Button

External Power Input

Fixing Screw

Door Camera Unit (Back)

NOTE: When using an external

power source, make a knockout

hole on the Mounting Base before

fixing to a wall. Place the Mounting

Base on a horizontal surface front

side down. Point a driver in the

center of the knock out and apply

gentle impacts to break a hole through.

 

view downwards

Wall Mounting
Base

Holes
drilled in wall

Mounting

Screws

10~24

Insert a    driver into

a small cavity on a rim to

pop up the main unit.     

ATTENTION:

Thank you for purchasing the wireless video intercom.

Before installation and usage, please read this instruction manual thoroughly

and keep this safe for future reference.

Knock Out

Reviews: