Assembly Instructions for the DXBHUF imitation birdhouse.
The DXBHUF is made from very durable and stable
natural
plywood.
Any real wood product will be
unique with minor imperfections and flaws.
The birdhouse may be left unfinished to weather to a natural grey finish
or it may be stained or painted as desired. The birdhouse is pre-drilled for
ease of assembly and countersunk fo
r
a professional finished look.
Assembly
Locate the sides and front using the diagram A as a guide.
*
Please use only a hand screwdriver to carefully install each screw.
Verify that the grooves to accept the back board are positioned on the inside before assembling. To extend the life
and strength of the finished product a common
exterior
wood glue
may
be used along with the screws.
Once the front is attached to the sides, slide the back into place along the gro
o
ves situated near the back of the sides.
Now the roof may be attached using 4 screws
being careful to keep the box square and aligning
the pre-drilled holes. The front of the roof may be
easily identified by it's front angle as shown in
diagram A1.
