Photoelectric Sensor
BGS-V2000 SERIES
AC/DC Type
DC Type
AC/DC Type
BGS-V2000
BGS-V2000T
DC Type
BGS-V2000
INSTRUCTION
MANUAL
¡
Confirm if the item meets your needs.
¡
Before the use, you should first thoroughly read
¡
this manual and operate correctly as mentioned.
¡
You should keep this manual at hand for proper use.
SPECIFICATIONS
AC/DC type
DC type
Cable type
BGS-V2000(T)
BGS-V2000(N,P)
Connector type
BGS-V2000(CN,CP)
Detection distance
0.5 ~ 2m (*1)
Detecting object
Opaque object
Supply voltage
12 ~ 24 VDC +/- 10%
24 ~ 240 VAC +/- 10% 50/60 Hz.
10 ~ 30 VDC +/- 10%
Current consumption
5VA max.
50mA max.
Response time
20ms max.
5ms max.
Hysteresis
15% max. (@ 1m)
5% max. (@ 2m)
Light Source
IR LED
Sensitivity adjustment
Teaching button
Timer function
ON/OFF Delay 1 ~ 10 sec.
Indicator
Output indicator: Orange LED, Stable incident indicator: Green LED
Control output
Relay output 1c 240 VAC 3A max.
NPN/PNP Open collector
30 VDC 3A max.
30 VDC 100 mA max.
Operation mode
Light ON
Light ON / Dark ON
Select by switch
Connection
Terminal base
Terminal base / M12 connector
Insulation Resistor
20 M ohm min. (500 VDC)
Withstand Voltage
2700 VAC 1 minute
Ambient temp./humidity
-25 ~ 55 C / 35 ~ 95% RH
Ambient light
Ambient light
Sunlight F10,000lx max.
Incandescent lamp 3,000 lx max.
Protection category/Material
IP67 / Case: ABS, Lens: PC
Weight
110g 95g
*1 0.5m x 0.5m white paper
-----
-----
o
INPUT AND OUTPUT
DIAGRAMS
PART IDENTIFICATION
Optex-FA U.S. Sales
Ramco Innovations
(800) 280-6933
www.optex-ramco.com
This Series is now Obsolete Contact Ramco @515-225-6933
