Optelec
ClearView
+
English
13
2.
Safety and Care
Please read the instructions carefully before setting up your
ClearView
+
. Keep this user manual for future reference.
Use the ClearView
+
(CV
+
) indoors. Do not expose the CV
+
to extreme or rapid changes in temperature or humidity. Do
not place the ClearView
+
near a radiator or heater, or where
it may be exposed to direct sunlight. These conditions may
damage the CV
+
’s electronic or optical components.
Do not place the CV
+
on an unstable surface. It may fall,
causing serious damage to the unit, or injury to the user.
If using your own monitor mounted on top of the ClearView
+
system, make sure it does not weigh more than 16 kg. The
ClearView
+
Monitor Platform was designed to support a
maximum of 16 kg.
Firmly grip the monitor by the surrounding frame when
positioning to ensure stability to the entire system. When
readjusting the 22
” or the 2
4
” monitor with the f
our-
directional ultra-flexible TFT arm, please ensure the
monitor does not tilt or rotate against the wings of the
electronic box.
The reading table and the monitor arm contain movable
parts. Please be careful when adjusting the screen
position, or when operating the reading table as to prevent
fingers or any loose clothing from getting caught in the
operating mechanism. If you have difficulty operating the
CV
+
safely, please seek assistance or contact your Optelec
distributor.
Contact your Optelec distributor to service this device if
necessary. Do not open your CV
+
; this will void the
warranty.
