manualshive.com logo in svg

Optek PROFIBUS C4151, Instruction Manual, Page: 8 / 64

Share
Download
Optek PROFIBUS C4151 Instruction Manual Download Page 8

Intended use

- 4 -

optek-Manual--1004-1010-02--ProfibusPA-US-2017-06-23

www.optek.com

2

Intended use

The converter is to be used exclusively for optek sensor assemblies according 

to the technical data.

In combination with inline sensors for turbidity, concentration, color and UV 

absorption, the converter is used for displaying and processing measuring 

results.

The converter may only be interfaced with sensors listed in the "Technical data" 

chapter of the corresponding instruction manuals.

The converter is to be installed in closed control cabinets with external switch, 

which allows the user to disconnect power. Please refer to the "Technical data" 

chapter.

This converter is not intended for use in hazardous areas.

Unauthorized constructional changes, additional fittings or modifications 

regarding the converter as well as tampering with or changing its software are 

prohibited.

The manufacturer is not liable for damage resulting from use contrary to the 

intended use.

Following this instruction manual is part of the intended use.

The content of all serial number plates on optek products is model-specific and 

refers to the time of delivery.

Summary of Contents for PROFIBUS C4151

































































Reviews:

No comments