Optek PROFIBUS C4151 Instruction Manual Download Page 5

Page: 5 / 64

Using the instruction manual

- 1 -

optek-Manual--1004-1010-02--ProfibusPA-US-2017-06-23

www.optek.com

Using the instruction manual

1.1

Validity of the instruction manual

This instruction manual is valid for optek PROFIBUS

converters C4151,

C4251, C4252, C4352, C4452, HC4351 and HC4452. It contains specific

information on the PROFIBUS

PA interface (Process Fieldbus - Process

Automation).

Information regarding the installation and operation of the converter is provided

in the supplied standard instruction manual of the corresponding converter.

To differentiate PROFIBUS

converters from standard converters by name, the

2 (for 2mA- and 7 remote inputs) in the model number (H)C4X2Z (X=1–4,

Z=1–2) was replaced with a 5.

The model number of PROFIBUS

converters is set up as follows:

Converter C4252 is thus a C4000 series converter with inputs for two sensors

as well as a PROFIBUS

PA interface and two lamp outputs.

The model number indicates the hardware configuration of your converter.

Therefore, the following combinations of instruction manuals apply:

Tab. 1

Instruction manual combinations overview

PROFIBUS

converter:

Instruction manuals

Remark:
Amendment with respect to
standard instruction manual

Additional manual

Standard of

C4151

PROFIBUS

C4121

Instead of mA- and remote inputs,

there is a PROFIBUS

interface.
Thus, chapters 8.6 "Connecting
the mA-inputs" and 8.8
"Connection Remote In" do not

apply to the PROFIBUS

version.

C4251

PROFIBUS

C4221

C4252

PROFIBUS

C4222

C4352

PROFIBUS

C4322

C4452

PROFIBUS

C4422

HC4351

PROFIBUS

HC4321

HC4452

PROFIBUS

HC4422

model number: (H)C4 _ 5 _

Number of
inputs for
optek-sensors

The "5" stands for the

PROFIBUS

input.

Number of
lamp outputs

Summary of Contents for PROFIBUS C4151

































































Search results

Summary of Contents for PROFIBUS C4151

Reviews:

Optek PROFIBUS C4151, Instruction Manual, Page: 5 / 64

Search results

Summary of Contents for PROFIBUS C4151

Reviews: