Optek PROFIBUS C4151 Instruction Manual Download Page 29

Page: 29 / 64

Addressing

- 25 -

optek-Manual--1004-1010-02--ProfibusPA-US-2017-06-23

www.optek.com

Note!

• If possible, only short connection lines to the slave should be used.

• There must only be one PROFIBUS

PA slave with the default address

126 on the bus. In case that several slaves to be configured are to be

integrated, they must be addressed consecutively.

• There must be no other master on the bus segment.

• The addressing should not be carried out in the project network.

Tab. 4

DP/PA segment coupler, DP/PA link

Siemens

Fuchs

DP/PA segment coupler

•

segment coupler transparent in DP net

(max. 124 slaves possible)

•

transfer rate: 45.45 kbit/s

•

address range for slaves: 3–125

•

DPV1 compatible (cyclic, acyclic)

Segment coupler SK1

•

segment coupler transparent in DP net

(max. 124 slaves possible)

•

transfer rate: 93.75 kbit/s

•

address range for slaves: 3–125

•

DPV1 compatible (cyclic, acyclic)

DP/PA link

•

multislave 124 slaves per device
possible

•

transfer rate: 12 Mbit/s

•

address range for slaves: 3–125

•

DPV1 compatible (cyclic, acyclic)

Segment coupler SK2

•

multislave 124 slaves per device
possible

•

transfer rate: 93.75 kbit/s

•

address range for slaves: 3–125

•

DPV1 compatible (cyclic, acyclic)

Summary of Contents for PROFIBUS C4151

































































Search results

Summary of Contents for PROFIBUS C4151

Reviews:

Optek PROFIBUS C4151, Instruction Manual, Page: 29 / 64

Search results

Summary of Contents for PROFIBUS C4151

Reviews: