manualshive.com logo in svg

Optek CONTROL 200, Instruction Manual, Page: 77 / 135

Share
Download
Optek CONTROL 200 Instruction Manual Download Page 77

C200

 

S

OFTWARE

  

Instruction Manual C200 Part2 A1.doc 

optek Danulat GmbH 

•

 D-45356 Essen 

•

 Germany 

page 55 

 

5.1.7 Configure Clock 

 

Note

. The Configure Clock function is available only if the option board is fitted and analog features enabled – 

see Section 6.1.3. 

 
 
 
 
 

 

Set Clock 

Set the system clock. 
 
 
 
 
 

Return to main menu. 
 
Option board fitted and Serial Communications feature enabled 
(Section 6.1.3)  
Single input analyzer and option board not fitted Dual input analyzer 
and option board not fitted – see Section 5.1.8. 

 
 

Format 

Select the required clock format. 
 
 
 
 
 

Date 

Set the date in the format dd:mm:yy. 
 
Press  

DOWNSCROLL

to move between the day, month and year fields. 

Use the 

UP

 and 

DOWN

  keys to adjust each field. 

 
 

Time 

Set the time in the format hh:mm. 
 
Press 

DOWNSCROLL

 to move between hours and minute fields. 

Use the 

UP

 and 

DOWN

 keys to adjust each field. 

 
 
 
 
 
 
Press to Set and Press to Abort are shown alternately on the lower display line. 
 
Press the appropriate key to set the clock or abort the changes. 

Set Clock?

-----

Date    01:01:01

-----

Day

Time       12:00

Set

-----

CONFIG. CLOCK

-----

-----

Format

-----

Press   To Set

Press   To Abort

Set

Hours

CONFIG. SERIAL

CONFIG. CLOCK

CONFIG. SECURITY

Set Clock?

mm:dd:yy

dd:mm:yy

CONFIG. CONTROL

Summary of Contents for CONTROL 200








































































































































Reviews:

No comments