C200
S
OFTWARE
Instruction Manual C200 Part2 A1.doc
optek Danulat GmbH
•
D-45356 Essen
•
Germany
page 19
2.2.2.2 Dual Input 4-Pole Conductivity
Measured Conductivity and/or Concentration Values
Sensor A conductivity value (A: Analyzer Type set to Cond – see Section 5.2.3).
Sensor B % concentration value (B: Analyzer Type set to Conc – see Section
5.2.3).
Note.
The displayed readings are the actual values of the sample.
Measured Temperature
Sensor A.
Sensor B.
Note. The displayed readings are the actual values of the sample.
Initial Charge – Sensor A
Select Yes to initiate an initial charge sequence.
Note. Displayed only if A1: Type is set to Dosing (see Section 5.2.4) and Initial
Charge is set to Yes (see Section 5.2.4).
Initial Charge – Sensor B
Select Yes to initiate an initial charge sequence.
Note.
Displayed only if A4: Type is set to Dosing (see Section 5.2.4) and Initial
Charge is set to Yes (see Section 5.2.4).
See Section 3.1.1.
See Section 4.2.
Temperature
25.6
Deg.C
24.4
Deg.C
Dual Cond.
0.883
uS/cm
0.020
%
VIEW SETPOINTS
SENSOR CAL.
Dual Cond.
A: Initial Charge
Yes
No
B: Initial Charge
Yes
No
