LBL-2019-41-v4 OptoMonitor 3 IFU wTAVI_en Rev 2022-03
29
|
P a g e
3.7
Graphical User Interface
OptoMonitor 3 Interface comprises a touch screen display with a graphical user interface through which
all user interaction is performed. Measurements are displayed as real-time graphical curves as well as
numerical values. The graphical layout may change depending on selected measurement mode, or current
state of the instrument.
INFORMATION SCREEN
At start-up of the device, the application access code must be entered to access the MAIN screen.
Before accessing the Main Screen, it is possible to access the System Info Screen through the Information
Button.
This page displays all information about the OpM3: The date and time set by the DU, the DU module
number, the DU and OU serial number, as well as the OU, DU and HU installed software versions and the
OU hardware version.
MAIN SCREEN
The first screen that appears when the instrument has been started is the MAIN screen. The MAIN screen
is divided into five areas as shown below.