FORCE-ON-FORCE
MANDIBLE
OPERATOR’S MANUAL
OPERATION
WEAPON SIGHTING
The Force-on-Force Mandible uses a soft, flexible
protective fabric with foam inserts that conform to
your weapon stock to enable sighting while in use.
STEP-IN VISOR ATTACHMENT
Slide the Step-In Visor attachment
clip into the rail tracks on the
mandible arms.
1
Attach the Step-In Visor to the
attachment clips.
2
CLEANING AND CARE
1.
Spot-clean rigid components with a mild detergent and water.
2.
Visually check the components for signs of breakage.
3.
Clean dust and dirt by using air pressure.
NOTE: IF ANY DEFECTS ARE FOUND, THE DAMAGED COMPONENTS SHOULD BE REPLACED
BEFORE USE.
For helmets equipped with Ops-Core
®
ARC Rails
This product is covered by one or more patents.
For more information visit
www.gentexcorp.com/patents
UM-1053 REV-A
© 2019 Gentex Corporation. Ops-Core is a registered trademark of Gentex Corporation or its affiliates.
Helmet not included
