Logging Data to a File for Upload to PC
StarBright User Manual
87
Average
Standard Deviation
The log file name is set to the sensor serial number _00.txt (like in StarLab). If there are already
log files for this sensor, the appended _00 counter will be auto incremented to the next
available value.
Figure
11-12 Log Summary
Note:
StarBright does not provide the user with the ability to add notes to a log file.
4.
Press any key to return to the active logging screen. The
Start
and
Exit
keys are displayed. The
display will be inactive and will be as it was when the log completed.
Figure
11-13 Active Logging Screen
5.
When
Start
is pressed, the logging counters will be reset, the display will be cleared and
activated. The
Stop
and
Abort
keys will be displayed.
11.4
Displaying Logged Data
You can access a list of log files to view information about a specific log file by pressing the Files
key in the
Log Setup
screen and selecting the relevant file.
Pressing the
Files
key in the
Log Setup
screen will open the Log File Selection Screen. StarBright
will open the “Log Files” directory on the Disk On Key and list all files of the format
serial_number_xx.txt.
The following procedure guides you through the relevant steps for log file selection.