Opex Model 72, Operator'S Manual

Page: 53 / 104

Operation 53
Model 72™ Operator Manual
OPEX Corporation
4.10. Stopping a job
A job may be ended at any time by pressing the Cancel button.
With the job run memory mode enabled, the Model 72 will save two
consecutive runs of the same job by the same operator as a single run. The
two runs must occur within a predetermined timeout period (set by your service
technician or system administrator). Pushing the
Cancel button will temporarily
suspend the first run rather than ending it. Resuming the run within the
designated timeout period will preserve the two separate runs in the same job.
This feature is helpful when an operator must temporarily stop a job run for
breaks, etc.