Opex FalconV, User Manual

Page: 73 / 130

Operation 73
FalconV User Manual - Standard Scanning - OPEX Corporation
About the Rescan Feeder
The Rescan Feeder consists of an illuminated slotted opening in the scan bed
cover and a button to activate/deactivate the mechanism directly to the right of
the slot.
The Rescan Feeder can only be activated via the Rescan Feeder button when
the machine is in a jammed or paused state.
In the event of a jam, the Rescan Feeder slot will flash blue at a 0.5 second
interval; alerting the operator that it may be selected for use to re-feed any
rejected or jam sorted items. If the operator activates the Rescan Feeder, the
jam dialogue will disappear from the screen and the slotted opening in the scan
bed cover will become solidly lit blue; alerting the operator that the Rescan
Feeder is now active and the machine expects items to be injected there.
To use the Rescan Feeder without multi-feed detection in the event of a
jam:
This mode may be desired so that an item with a sticky note can be processed
through the scanner without the machine jamming for a multi feed.
1 When the Rescan Feeder slot is flashing, press the button located directly
to the right of the slot.
2 Wait for the jam dialog to disappear and the slot to become solidly lit.
3 Inject the item(s) one at a time into the slot.
Rescan Feeder button
Rescan Feeder illuminated slot