RealMom
copyright © 2018 Operative Experience
10002_A
18
All rights reserved
Fetal Heart Rate
Fetal Heart Rate
can be set from 0 to 220 bpm (beats per minute) using the slider bar or by using the
minus the plus (+) controls on either side of the reading.
Figure 24: Setting the Fetal Heart Rate
This parameter can be viewed on the Trainee Interface. The fetal heart rate can be changed during the
simulation “on the fly.”
Station
The
Station
can be set from -3 to 2 using the slider bar or by using the minus the plus (+) controls on
either side of the reading. The baby moves through the birth canal based on the
Station
setting.
Figure 25: Controlling the Station
The station can be changed during the simulation “on the fly.”
