RealMom
copyright © 2018 Operative Experience
10002_A
17
All rights reserved
SpO2
RealMom’s
SpO2
(oxygen saturation rate) can be set from 0 to 100 using the minus (-) and the plus (+)
controls. Click on the panel to activate the menu to use the slider bar.
Figure 22: Setting the SpO2
This parameter can be viewed on the Trainee Interface. RealMom’s SpO2 can be changed during the
simulation “on the fly.”
Respiratory Rate
RealMom’s
Respiratory Rate
can be set from 0 to 60 bpm (breaths per minute) using the slider bar or by
using the minus the plus (+) controls on either side of the reading.
Figure 23: Setting the Respiratory Rate
This parameter can be viewed on the Trainee Interface. RealMom’s respiratory rate can be changed
during the simulation “on the fly.”
