Analog Gateway User Manual
OpenVox Communication Co. ,LTD.
59
0
Permit
If you want to permit many hosts or network, use char & as separat
or.Example: 0.0.0.0/0.0.0.0 or 192.168.1.0/255.255.255.0&10.0.0.0/255.0.
0.0
System
General information about the system and ability to run system management
commands, such as Shutdown, Restart, and Reload.
Call
Information about channels and ability to set information in a running
channel.
Log
Logging information. Read
-
only. (Defined but not yet used.)
Verbose
Verbose information. Read
-
only. (Defined but not yet used.)
Command
Permission to run CLI commands. Write
-
only.
Agent
Information about queues and agents and ability to add queue members to a
queue.
User
Permission to send and receive UserEvent.
Config
Ability to read and write configuration files.
DTMF
Receive DTMF events. Read
-
only.
Reporting
Ability to get information about the system.
CDR
Output of cdr, manager, if loaded. Read
-
only.
Dialplan
Receive NewExten and Varset events. Read
-
only.
Originate
Permission to originate new calls. Write
-
only.
All
Select all or deselect all.
Once you set like the above figure, the host 172.16.80.16/255.255.0.0 is allowed to access the
gateway API. Please refer to the following figure to access the gateway API by putty. 172.16.80.16
is the gateway’
s IP, and 5038 is its API port.