OpenVox VS-GW1202 User Manual Download Page 61

Page: 61 / 82

GSM/3G User Manual

61 | 82

Figure 6-4 SMS Control

For example, SMS control password is 123456789 which has nothing to do with the login
password, you can send “get info 123456789” to the GSM module’s phone number to get
your gateway’s IP information.

Table6-4 Definition of SMS Control

Options

Definition

Enable

ON(enable), OFF(disable)

Password

The password to confirm that SMS makes the gateway rebooted,

shut down, restored configuration files and get info on this gateway.

SMS Format

For example, the message formats:

reboot system PASSWORD: To reboot your whole gateway.

The PASSWORD is referring to the PASSWORD you set up from
option “PASSWORD” above.

Reboot asterisk PASSWORD: To restart your gateway core.

Restore configs PASSWORD: To reset the configuration files back

to the default factory settings.

Get info PASSWORD: To get your gateway IP address

SMS inbox

Auto clean

switch on: When the size of the SMS inbox record file reaches the

max size, the system will cut a half of the file. New record will be

retained.

switch off: SMS record will remain, and the file size will increase

gradually. default on, max size = 20 MB

Summary of Contents for VS-GW1202



















































































Search results

Summary of Contents for VS-GW1202

Reviews:

OpenVox VS-GW1202, User Manual, Page: 61 / 82

Search results

Summary of Contents for VS-GW1202

Reviews: