OpenVox VS-GW1202, User Manual, Page: 51 / 82

GSM/3G User Manual
51 | 82
yes, then we cancel the whole thing(that’s enough time for one
retransmission only ).This is used to keep things from stalling for a
long time for a host that is not available for bad connections.
Language
You may specify a global default language for users. This can be
specified also on a per-user basis. If omitted, will fallback to
English(en)
Account Code
You may specify a default account for Call Detail Records (CDRs) in
addition specifying on a per-user basis.
Table 4-17 Instruction of Music on Hold
Options Definition
Mohsuggest The
‘Mohsuggest’ option specifies which music on hold class to
suggest to the peer channel when this channel place the peer on
hold. It may be specified globally or on a per-user or per-peer basis.
Mohinterpret You may specify a global default language for users. This can be
specified also on a per-user basis. If omitted, will fall back to
English(en)
Table 4-18 Instruction of Codec Settings
Options Definition
Band Width Specify bandwith of low, medium, or high to control which codes are
used in general
Disallow Fine
tune codes here using “allow” and “disallow” clause with specific
codes
Allow Fine
tune codes here using “allow” and “disallow” clause with specific
codes
Codec Priority Codec priority controls the codec negotiation of an inbound IAX2 call.
This option is inherited to all user entity separately which will override
the setting in general.
Table 4-19 Instruction of Jitter Buffer
Options Definition
Jitter Buffer Global default as to whether you want the jitter buffer at all
Force Jitter Buffer In
the ideal world, when we bridge VoIP channels we don’t want to
jitter buffering on the switch, since the endpoints can each handle
this. However, some endpoints may have poor jitter buffers
themselves, so this option will force to always jitter buffer, even in
this case.
Max Jitter Buffers A maximum size for the jitter buffer
Resyncthreshold When the jitter buffer notice a significant change in delay that