OpenVox VS-GW1202 User Manual Download Page 39

Page: 39 / 82

GSM/3G User Manual

39 | 82

DTMF Mode

Set default DTMF Mode for sending DTMF. Default:

rfc2833. Other options: 'info', SIP INFO message

(application/dtmf-relay); 'Inband', Inband audio (require 64kbit

codec -alaw, ulaw).

Trust Remote-

Party-ID

Whether or not the Remote-Party-ID header should be trusted.

Send Remote-

Party-ID

Whether or not to send the Remote-Party-ID header.

Remote Party

ID Format



How to set the Remote-Party-ID header: from Remote-Party-ID

or from P-Asserted-Identity.

Caller

ID Presentation

Whether or not to display Caller ID.

Call Limit

Usually used when this sip work as a trunk. To limit number of

maximum channels supported by the sip trunk.

Advanced -- Signalling Settings

Table 4-4 Definition of Signaling Options

Options

Definition

Progress Inband

Set default DTMF Mode for sending DTMF. Default: rfc2833.

Other options: 'info', SIP INFO message (application/dtmf-relay);

'inband', Inband audio (require 64kbit codec -alaw, ulaw).

Allow Overlap

Dialing



Whether or not the Remote-Party-ID header should be trusted.

Append

user=phone to

URI

Whether or not to send the Remote-Party-ID header.

Add Q.850

Reason Headers



How to set the Remote-Party-ID header: from Remote-Party-ID

or from P-Asserted-Identity.

Honor SDP

Version

Whether or not to display Caller ID.

Allow Transfers

Whether or not to globally enable transfers. Choosing 'no' will

disable all transfers (unless enabled in peers or users). Default is

enabled.

Summary of Contents for VS-GW1202



















































































Search results

Summary of Contents for VS-GW1202

Reviews:

OpenVox VS-GW1202, User Manual, Page: 39 / 82

Search results

Summary of Contents for VS-GW1202

Reviews: