GSM/3G User Manual
26 | 82
Custom AT
commads when
start
User custom AT commands when start system, use “|” to split
AT command.
CLIR
Caller ID restriction, this function is used to hidden caller ID of
SIM card number. The gateway will add ‘#31#’ in front of mobile
number. This function must support by Operator.
SMS Center
Number
Your SMS center number of your local carrier.
GSM Module
IMEI
You can
click “Modify” button and automatically modify it.
Call Duration Limit Settings
Now we can offer you two types of call duration limit, you can choose “Single Call
Duration Limit” or “Call Duration Limitation” to control your calling time
Single Call Duration Limit:
This will limit the time of each call.
First you need to switch “Enable” on, then you can set “Step” and “Single Call Duration
Limitation” any digits you want. When you make a call by this port, it will limit your calling
time within the product of
Step * Single Call Duration Limitation
And if your calling time overtops the value above, the system will hang up this call.
Figure 3-11 Single Settings
Call Duration Limita
tion:
This will limit your total calling time of this port. If remain time
is 0, it will not send calls through this port.
Summary of Contents for VS-GW1202
Page 2: ...GSM 3G User Manual 2 82 Version1 0 2016 05 12 Full text The overall layout adjustment ...
Page 12: ...GSM 3G User Manual 12 82 Notice Log in Figure 1 8 LOG Interface ...
Page 34: ...GSM 3G User Manual 34 82 Figure 3 22 AT Command Example ...
Page 82: ...GSM 3G User Manual 82 82 Application Diagrams ...