B400P/BE400P on DAHDI User Manual
OpenVox Communication Co. LTD.
URL: www.openvox.cn
25
In the CLI, please run the following commands
"dahdi show channels"
and
"pri show spans"
:
*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State
pseudo default default In Service
1 from-isdn default In Service
2 from-isdn default In Service
4 from-isdn default In Service
5 from-isdn default In Service
7 from-internal default In Service
8 from-internal default In Service
10 from-internal default In Service
11 from-internal default In Service
*CLI> pri show spans
PRI span 1/0: Up, Active
PRI span 2/0: In Alarm, Down, Active
PRI span 3/0: Up, Active
PRI span 4/0: In Alarm, Up, Active
Figure 7 channels and spans show
If the span is up and active and not "In Alarm”, it means successfully
installation. Otherwise, please check the setting files and physical
connections.
4. Dialplan edit
You should make sure that the context
"
from-isdn
"
and
"
from-internal
"
are in extensions.conf, here a simple example is given:
# vim /etc/asterisk/extensions.conf
