background image

OpenText Tableau TD2u Forensic Duplicator 

 

The Information Company 

27 

This operation allows you to set up new encrypted destinations. Whole disk encryption 

requires this setup, which writes over any data on the drive to create an encryption 

container for whole disk encryption. Only drives encrypted this way are supported as 

encrypted drives by TD2u. The TD2u identifies drives that appear to have been 

encrypted this way. 
You are prompted to enter a new drive password for the drive or drives to be encrypted. 

This password is required each time you want to access the data on the destination (read 

or write). If the encryption header set up by Encrypt New Destination is overwritten, the 

encrypted data is permanently lost. See the OpenText website for more information on 

the methods and algorithms used for TD2u encryption. 
Securely encrypting destinations takes 15 to 20 seconds. 

4.6.2  Unlock Destinations (Menu 3.2) 

 

This operation allows you to unlock destinations that appear to have been encrypted by a 

TD2u. When you click [Start] there is a prompt to enter passwords for each destination to 

be unlocked. Unlocking encrypted destinations takes 15 to 20 seconds. 

Summary of Contents for Tableau Forensic TD2u
















































Reviews: