OpenScape CP200 Page 65 User Manual Download

Page: 65 / 155

Rejecting a call

Press the DSS key. The call is routed to your primary line and rings.

Select and confirm the option shown in the pop-up menu.
The caller hears a busy signal.

Direct pickup

Prerequisite

: The auto-answer function is activated



page 106.

Press the DSS key. The call is routed to your primary line and you are immedi-
ately connected with the other party via speakerphone.

Deflecting a call to a DSS subscriber

Prerequisite

: The deflect function must be approved for DSS keys. For informa-

tion on the current setting, see



page 111.

If you receive a call on one of your lines, you can immediately deflect it to the
DSS subscriber.

Your phone rings and a line key flashes.

Press the relevant DSS key. The call is deflected to the DSS subscriber. If the
DSS subscriber does not answer, you can pick up the call by pressing the DSS
key.

LED display on DSS keys

The administrator must activate the reject option for DSS keys and auto-
answer must be deactivated



page 106.

DSS 1

Reject

DSS 1

DSS key

Meaning

Off

: The phone is in idle mode.

Blinking green

: You can accept a call for the DSS subscriber via

the key. The call is routed to your primary line when the call is ac-
cepted.

Lighting green

: The line is busy. Provided that second call is ac-

tivated you can still reach the DSS subscriber via the key. It can
accept your call as a second call.

Summary of Contents for CP200




























































































































































Search results

Summary of Contents for CP200

Reviews:

Related manuals for CP200

Brands by name

Popular brands

OpenScape CP200, User Manual

Search results

Summary of Contents for CP200

Reviews:

Related manuals for CP200

Brands by name

Popular brands