manualshive.com logo in svg

OpenScape CP200, User Manual

Share
Download
OpenScape CP200 User Manual Download Page 103

103

Activating/deactivating call forwarding

Prerequisite

: A forwarding destination is already configured for the relevant for-

warding type.

Press the function key to open forwarding.

The pop-up menu opens:

The message:

"

Set forward on to

" is displayed with the number of the last forwarding destina-

tion and you have the following options:
• Accept
• Set a forwarding destination
• Edit call forwarding
• Cancel
Select and confirm the option shown within 3 seconds.

Choose one of the forwarding types offered:

Uncond’l: 3339 (deactivated is the default setting)

Busy: 3335

No reply (xs): 3336

and confirm your selection. Here for example Uncond’l.
Select and confirm the option shown. Call forwarding is activated. This type of 
call forwarding is deactivated with 

Turn off

.

The call forwarding settings can appear as follows:

Uncond’l: 3339 (deactivated is the default setting)

Busy: 3335

No reply (xs): 3336

@

Press the illuminated key to open the call display. If Uncond’l was activated, the 
forwarding destination is displayed with the forwarding icon and the 

Forwarding

 

key illuminates. The Busy and No reply (xs) types of call forwarding are not dis-
played.

ß

_

Edit call forwarding?

f

 

Uncond’l

: 3339

l

 Turn on: 

l

Summary of Contents for CP200




























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands