Opengear ACM5000, User Manual

Page: 159 / 335

User Manual
Advanced Console Server & RIM Gateway User Manual
159
7.3.3 Perform RPC Action

Click on Perform RPC Action as the Add Trigger Action . Enter a unique Action Name and set the Action
Delay Time

Select a power Outlet and specify the Action to be performed (power On, OFF or Cycle)

Click Save New Action
7.3.4 Run Custom Script

Click on Run Custom Script as the Add Trigger Action . Enter a unique Action Name and set the Action Delay
Time

Create a script file to execute when this action is triggered and enter the Script Executable file name e.g.
/etc/config/action.sh

Set the Script Timeout (i.e. the maximum run-time for the script). Leave as 0 for unlimited.

Enter any Arguments that are to be passed to the script and click Save New Action
7.3.5 Send SNMP Trap

Click on Send SNMP Trap as the Add Trigger Action . Enter a unique Action Name and set the Action Delay
Time
Note: The SNMP Trap actions are valid for Serial, Environmental, UPS and Cellular data triggers only
7.3.6 Send Nagios Event

Click on Send Nagios Event as the Add Trigger Action . Enter a unique Action Name and set the Action Delay
Time

Edit the Nagios Event Message text to display on the Nagios status screen for the service

Specify the Nagios Event State ( OK, Warning, Critical or Unknown ) to return to Nagios for this service

Click Save New Action
Note: To notify the central Nagios server of Alerts, NSCA must be enabled under System: Nagios and Nagios must be
enabled for each applicable host or port