OpenEye OE-C97512 Quick Start Manual Download Page 1

QUICK START GUIDE

OE-C97512 | Fisheye IP Camera

This quick start guide is a reference for users to install and operate your 
OpenEye camera and only provides basic information on the camera’s settings 

and operation. Before attempting to connect, configure and operate your 

OpenEye camera, please read the user manual thoroughly.

36830AB

www.openeye.net

Copyright ©2019 OpenEye. 
All Rights Reserved. Information contained in this document is 
subject to change without prior notice. OpenEye does its best to 
provide accurate information but cannot be held responsible for 
typos or mistakes.

OE-C97512

Cover release

1

To access mounting holes, 
reset, and microSD slot

Built-in 
microphones

2 Audio In

Speaker

3 Audio Out

Reset button 
(Under Cover)

4

Press and hold this button 
for 20 seconds within 5 
minutes of power cycling to 
reset the camera to factory 
defaults

microSD slot  
(Under Cover)

5

Insert microSD card to store 
video and images

CAMERA

23221 E Knox Ave
Liberty Lake, WA  99019
509.232.5261
ww.openeye.net

NOTE  

    

It is not recommended to record 
continuously to the microSD card. 

Cable Connections
RJ-45

1

Data Connection

Audio I/O

2

Audio In
Audio Out

3

2

2

2

1

1

2

 

Waterproof Cable

1

Thread lock cap

4

Rubber “O” ring

2

Rubber plug

5

Camera cable

3

RJ45 enclosure

5

4

3

1

2

4

5

Summary of Contents for OE-C97512






Reviews: