34918AG
23
Picture Adjustment
Each of the Picture Adjustment settings is set to the recommended default.
Brightness – Adjust the image’s brightness on the camera. The Backlight value is
adjustable from 0 (dim) ~ +20 (brightest).
Sharpness – Increasing the sharpness level can make the image looked sharper; it
especially enhances an object’s edge. The value of sharpness is adjustable from 0 ~ +10
(sharpest).
Contrast– Adjust the contrast value from -6 to 19.
Saturation– Adjust the color saturation form -6 to 19 (most saturation).
Hue– Adjust the hue from -12 to 13.
Backlight– Backlight compensation can correct for overly-bright backlit sceneries.
D-WDR Function– Turn the Digital Wide Dynamic Range Off, or adjust between 1 and 3.
Click Set after making changes to the Picture Adjustment settings to save the settings and update
the Live screen.
Motion Detection
Use the Motion Detection menu to configure the motion detection window(s). Here, Motion
Detection can be turned On or Off, and other general settings can be specified.
To enable motion detection:
1.
Use the Motion Detection dropdown to select a motion detection preset (1-4). If choosing an
additional preset after 1, check the On checkbox.
Note
A motion detection preset can be turned Off at a later time.
2.
If desired, check the By Schedule check box and use the dropdown menu to select a
schedule.
3.
Designate the Motion Detection Setting values.
4.
Check the appropriate boxes to designate the Trigger Action.
5.
Click Save.