22
FILE LOCATION
This is the destination location that snapshot photos and recorded videos will be saved to.
To select a destination location:
1.
Click Select.
2.
Choose a location or folder.
3.
Click Save in the file window, and then click Save again.
PICTURE SETUP
Camera Tab
Use the Camera Tab section to modify picture settings for the camera. The sample image will
change as you modify the picture settings.
Note
These settings can drastically affect the camera image. OpenEye suggests that these settings
are only modified by a CCTV professional, or at the instruction or a technical support
representative.
Exposure
Min Shutter Speed – Choose a pre-determined shutter speed.
Manual Mode – Changing the shutter mode to manual will allow
you to select the minimum shutter speed that the camera will use.
This can drastically change the amount of light entering the
camera.
Click Set to save your changes.
White Balance
Use the white balance setting to change color representation in
difficult lighting conditions.
Auto – White balance works within its color temperature range and calculates the best-fit white
balance.
ATW – Auto-tracing white balance, the camera removes the signals within a range of 2000K to
10000K, which helps to even out the bright white portions of an image.
One Push – Balances color temperature based on a white object within the viewing area.
Manual – Change the white balance value by specifying the R gain and B gain.
Click Set to save your changes.