37521AA
41
Synchronizing with the NTP Server
1.
Set
Sync Mode
to
Sync with NTP Server
,
and then set
the
NTP Server Address
,
Port
and
Update
Interval(s)
.
2.
Click
Save
. The camera will periodically synchronize time with the NTP server.
Setting the DST
1.
Select
On
for
DST
, set the
Start Time, End Time
, and
DST Bias
.
2.
Save
Maintenance
Software Upgrade
To update your camera software, click
Browse
, select the software file, click
Open
, and then click
Upgrade
.
Note
The software file must be a .zip file.
Device Restart
This will restart your camera.
Config Management
1.
To import configurations that you have backed up, click
Browse
, select the configuration file,
and then click
Import
.
2.
To export current system configurations, click
Export
.
3.
To restore default configurations, click
Default
and then confirm the operation. The device will
restart and restore the default configurations. Clicking
Default
with the check box selected will
default all camera and camera network settings.
Diagnosis Info
Diagnostic Information includes logs and system configuration. You can export diagnostic information to
your PC.
Note
Diagnostic information is exported to the local folder as a compressed file. You will
need to decompress the file, and then open the file using a text editor.
