37521AA
13
USERNAME AND PASSWORD
*OpenEye IP cameras ship without a default password.
Username:
admin
The
admin
user password can be set using the following methods:
1.
OpenEye recorders running Apex 2.1 or newer will automatically set a new unique password
if:
•
Connected to an M-Series recorder with a built in PoE switch.
•
Connected to a network switch through the camera network port and selected then
added in setup, if a new password has not already been set.
2.
Connect to the camera directly through a Web Browser and follow the onscreen prompts.
3.
Use the Network Camera Manager (NCM) Utility.
Note
The NCM Software Manual can be found at https://www.openeye.net/ncm-manual.
Note
Refer to your Apex recorder manual or quick start guide for instruction on adding cameras.
Passwords must be 9-32 characters, contain at least 1 capital and 1 lower case letter, 1
number, and 1 unique character.
VIEWING A NETWORK CAMERA
Click
Load
in the row of the desired camera.
Enter a new Admin password.
•
Passwords must be a minimum of 9 characters
•
Accepted characters: A-Z, a-z, 0-9, all special characters are allowed.
