Open 824RL Technical Reference Download Page 8

Page: 8 / 113

OPEN824RL / RLW ADSL / VoIP Routers

Technical Reference

Installing the Router

Important note for using this router

WARNING!

•

Do not use this router in high humidity or high temperatures.

•

Do not use the same power source for this router as other equipment.

•

Do not open or repair the case yourself. If this router is too hot, turn off the power
immediately and have it repaired at a qualified service centre.

•

Avoid using this product and all accessories outdoors.

ATTENTION!!

•

Place this router on a stable surface.

•

Only use the power adaptor that comes with the package. Using a different voltage
rating power adaptor may damage this router.

Package Contents

VoIP/(802.11g) ADSL2 Router

CD-ROM containing the online manual

RJ-11 ADSL/telephone Cable

Ethernet (CAT-5 LAN) Cable

AC-DC power adaptor (12VDC, 1.2A)

A detachable antenna (OPEN824RLW only)

Quick Start Guide

Line Splitter / Filter

Console kit

Summary of Contents for 824RL


















































































































Search results

Summary of Contents for 824RL

Reviews:

Related manuals for 824RL

Brands by name

Popular brands

Open 824RL, Technical Reference

Search results

Summary of Contents for 824RL

Reviews:

Related manuals for 824RL

Brands by name

Popular brands