Ooni Pro Gas Burner FSD Manual Download Page 2

1

Please read the present legal disclaimer fully before assembling, installing and using/servicing 
your Ooni Pro Gas Burner FSD attachment part in connection with your Ooni Pro oven. Failure 
to comply with all the provisions of the present legal disclaimer could result in property damage, 
serious bodily injury or even death, or in a fire causing damage to property.

1. 

When using Ooni Pro oven together with your Ooni Pro Gas Burner FSD attachment part, 
bear in mind that (i) the Ooni Pro Gas Burner FSD attachment part shall only be used with 
your Ooni Pro oven which excludes any other appliance, and (ii) the entirety of the provisions 
of the Ooni Pro oven’s Safety Legal Disclaimer also apply to the use of the your Ooni Pro 
Gas Burner FSD attachment part in addition to the provisions of the present safety legal 
disclaimer. You are strongly advised to not use your Ooni Pro oven with the Ooni Pro Gas 
Burner FSD attachment part until your Ooni Pro oven has been thoroughly and properly 
gas leak-tested. 

2.  Combustion by-products, produced when using the Ooni Pro oven with your Ooni Pro Gas 

Burner FSD attachment part, contain carbon and carbon monoxide in the flue gas of Ooni 
Pro Gas Burner FSD; these substances, if inhaled indoors or in any other unventilated area, 
are known as a possible cause of death through asphyxiation and/or carbon monoxide 
poisoning.

3.  If Ooni Pro Gas Burner FSD does not light, turn knobs OFF, wait 5 minutes, and try again. 

Always close the gas valve during the 5 minute waiting period. If Ooni Pro Gas Burner FSD 
does not ignite with the valve open, gas will continue to flow out of Ooni Pro Gas Burner 
FSD and could accidentally ignite with risk of injury.

4.  If a gas leak is detected at any time, STOP and call the fire department. Leaking propane 

may result in explosion, fire, severe personal injury, or death. If you smell gas (1) shut off gas 
to the appliance, (2) extinguish any open flame, (3) open door, and (4) if odour continues, 
keep away from your Ooni Pro oven and immediately call your gas supplier or your fire 
department. If you cannot stop a gas leak, immediately close LPG (propane) valve and 
call LP gas supplier or your fire department. If “growing” bubbles appear in the cylinder do 
not use or move the LPG (propane). Contact an LP gas supplier or your fire department.

5.  Do not store or use gasoline or other flammable liquids or vapours in the vicinity of your 

Ooni Pro oven or any other appliance. Do not insert any tool or foreign object into the valve 
outlet or safety relief valve. You may damage the valve and cause a leak. Never attempt 
to attach your Ooni Pro Gas Burner FSD to the self-contained LP gas system of a camper 
trailer or motor home. Never operate your Ooni Pro oven with LPG (propane) in any other 
position other than that specified in assembly instructions. Always close LPG (propane) 
valve before moving LPG (propane) from specified operation position. Turn controls and 
gas source or tank OFF when not in use.

Safety Legal Disclaimer: Must be read in full prior to use 

For use with LPG (propane) gas only.

Use only with supplied gas regulator.

Register your Ooni Pro Gas Burner FSD 

at 

ooni.com

For the full user guide, cooking 

instructions, tips and tricks please visit 

ooni.com

Summary of Contents for Pro Gas Burner FSD














Reviews: