1
2
Place & Aim the Indoor/Outdoor Home Antenna
A.
Access the
Signal Indicator
screen by pressing
menu
and
then pressing
to scroll to and highlight
Signal Indicator
.
Press the
Select button
.
B.
Try experimenting with the Indoor/Outdoor Home Antenna
to get a feel for the reception in your location. If you find
you are receiving a good Satellite or Terrestrial signal (or
both), you’re done aiming the antenna. Press and hold
menu
to exit the
Signal Indicator
screen. The radio should
be tuned to channel 1, the XM Preview channel. Continue
with step 3.
C.
If you are not yet receiving a good signal, move the
antenna around the room or from room to room. Aim it
at different windows, try moving the antenna closer to a
window, ideally one that is facing due south.
Not sure which way is south? Think about where the sun
rises (in the east) and sets (in the west). Then stand so
that east is to your left and you’ll be facing south. Is there
a window in the direction you’re facing? Place the antenna
on the windowsill making sure it faces the glass and not
the window frame. If you are receiving a good Satellite or
Terrestrial signal (or both), you’re done aiming the antenna.
S
Signal Indicator
SATELLITE
TERRESTRIAL
SOUTH
Connect the Home Dock and Dock the Radio
Select a location in close proximity to your stereo system or powered speakers, and also where the
cable from the Indoor/Outdoor Home Antenna can reach the Home Dock. The location should be
easily accessible and provide good visibility of the display, but should not be located where it will be
in direct sunlight, which will reduce the visibility of the display screen.
A.
Connect the Indoor/Outdoor Home
Antenna to the
silver ANT
connector at
the rear of the Home Dock.
B.
Connect the Home Power Adapter to the
red Power
connector at the rear of the
Home Dock, and plug it into a wall outlet.
C.
Place your Onyx in the Home Dock.
D.
Power on your Onyx by pressing the Power button.
3
Connect the Audio
4
Subscribe
You can either follow the general activation and subscription process or use the on-board activation guide to activate your Onyx and subscribe to the XM service.
General activation and subscription process:
A.
Make sure your Onyx is turned on, tuned to XM Preview channel 1, and receiving the XM signal so that you can hear the XM audio.
B.
Make a note of your XM Radio ID. You can find it by selecting
Radio ID
in menu items, by tuning to channel 0, on a label on the bottom of the gift box, and on the label on the back of your Onyx.
NOTE!
The XM Radio ID does not use the letters I, O, S, or F.
C.
To subscribe:
• Online: Go to
www.siriusxm.com
and click on “
How Do I Activate a Radio
?” to subscribe.
OR
• By phone: Call
1-800-XM-RADIO
(1-800-967-2346)
Activation usually takes 10 to 15 minutes after you have completed the subscription process, but may take up to an hour. We recommend that your Radio remain
on until subscribed. Once subscribed, the Radio will receive and you can tune to channels in your subscription plan.
Star
t Her
e
ANT
AUDIO
POWER
ANT
AUDIO
POWER
2
3
4
5
6
7
8
9
0
direct
jump
FM
menu
1
The Home Dock can be connected to your stereo system, or to a set of powered speakers.
To Connect the Home Dock to Your Stereo System:
A.
Take the provided Stereo Audio Cable and connect the single connector to the
green AUDIO
connector at the rear of the Home Dock.
B.
Connect the white left and red right Stereo Audio Cable connectors (“L” and “R” are also on each
respective tip) to any available input other than PHONO on your stereo system. (If your stereo’s
inputs are marked red and black, connect the white plug to the black input.)
C.
Turn the stereo system On,
and make sure you select
the correct input on your
stereo system for the AUX
In or LINE In connection.
D.
If you have connected
everything correctly, and you are
receiving the XM signal, you should hear
the XM audio from channel 1.
E.
The audio level of your Radio can also be adjusted, if necessary. Refer to “Set Audio Level” on
page 54 of the User Guide to adjust the audio level.
To Connect the Home Dock to Your Powered Speakers:
A.
Connect the powered speakers to the
green AUDIO
connector at the rear of the Home Dock.
B.
Plug the powered speakers into a wall
outlet.
C.
Turn On the powered speakers.
D.
If you have connected everything
correctly, and you are receiving the
XM signal, you should hear the XM
audio from channel 1.
E.
The audio level of your Radio can also be adjusted, if necessary. Refer to “Set Audio Level” on
page 54 of the User Guide to adjust the audio level.
ANT
AUDIO
POWER
ANT
AUDIO
POWER
L
R
800-643-2112
siriusxm.com
1
XM Preview
800-643-2112
siriusxm.com
1
XM Preview
Press and hold
menu
to exit the
Signal Indicator
screen. The radio should be tuned to
channel 1, the XM Preview channel. Continue with step 3.
If you were unable to find an indoor location for the antenna, you will need to place it outdoors.
Refer to “Step 2: Place and Aim the Indoor/Outdoor Home Antenna” on page 16 of the User Guide
for outdoor location options.
Press
or to tune to other channels, and
or
to browse the different categories of channels. Learn what all the buttons do on the
opposite side of this Quick Start Guide.
Activation guide:
For your convenience, Onyx has an on-board activation guide. You can activate your radio and subscribe to the XM service by using this
guide, where you will be guided step-by-step through the subscription process. To access and use the guide, simply follow these steps:
A.
Turn Onyx on and press the
menu button
.
B.
Activate Radio
will be highlighted. Press the
Select button
.
C.
Follow the directions on each successive screen until you complete the subscription process.
Menu
Activate Radio
Radio ID
FM Settings
JUMP Settings
Brightness
