12-2
INTEGRA Operations Revision A
7/26/00
20-0200-231 (CR), 20-0200-232 (Std), 20-0200-251 (CD)
LOGON WITHOUT THE SECURITY KEY
It is possible to access two security levels in the system without using
the key. Both may be accessed through logon names and passwords
established for each user and entered into the security screen (see
SECURITY SCREEN
below). There may be operators who logon but are
not required to have a password.
Logon w/o Password
To complete the logon process without a password, use the following
procedure.
1 The computer displays a
SYSTEM MESSAGE
DISPLAY screen
requesting a Logon ID name for the operator wishing to logon
when the system initializes or when requesting access to a secure
function (e.g., Engineering).
2 Touch
YES
to display the Keyboard screen.
3 When the Keyboard screen displays, enter the logon name by
touching each successive letter in the name. (Remember, the
logon name must have no more than 6 characters.)
4 Touch the ENTER key on the screen when the logon name has
been entered.
5 If the logon is not correct a SYSTEM MESSAGE DISPLAY screen
appears with the message “Name not accepted. This operation
will be aborted!”
Logon w/ Password
To complete the logon process with a password, use the following
procedure.
1 If logging on with a password, go to the ONTRAK SYSTEMS
INC. (MAIN MENU) and touch LOGON.
Summary of Contents for Synergy Integra
