ONTRAK Synergy Integra, Operation Manual

Page: 197 / 350

C h a p t e r 9 P R O C E S S R E C I P E
7/26/00 INTEGRA Operations Revision A 9-37
20-0200-231 (CR), 20-0200-232 (Std), 20-0200-251 (CD)
Change BRUSH IDLE ON TIME
17 Touch BRUSH IDLE ON TIME ( a.k.a. BRUSH CLEAN ON TIME)
for Brush Station #1 Cleaning to display the
NUMBER PAD
and
set the brush cleaning (clean on) duration time.
18 Enter the desired time in
10
th
of seconds on the
NUMBER PAD
(not
shown), and touch ENTER.
Use the BRUSH IDLE ON TIME button to set the length (duration)
of brush cleaning time. During the “clean on” cycle, process
chemical flows through or drips on the turning brushes,
and the DI
HIGH FLOW and/or DI LOW FLOW activates to simultaneously
flush DI water through the brushes from the inside. This joint
process cleans the brushes.
19 Touch BRUSH IDLE ON TIME for Brush Station #2 Cleaning to
display the
NUMBER PAD
and set the brush cleaning (clean on)
duration time.
20 Enter the desired time in
10
th
of seconds on the
NUMBER PAD
(not
shown), and touch ENTER.
The
BRUSH IDLE ON TIME
value
displays on the screen in seconds .
STANDARD