ONTRAK Synergy Integra, Operation Manual

Page: 196 / 350

9-36 INTEGRA Operations Revision A 7/26/00
20-0200-231 (CR), 20-0200-232 (Std), 20-0200-251 (CD)
Change BRUSH IDLE TIME
13 Touch BRUSH IDLE TIMER for Brush Station #1 Cleaning to
display the
NUMBER PAD and
set the time delay.
14 Enter the desired time in
10
th
of seconds on the
NUMBER PAD
(not
shown), and touch ENTER.
Use the BRUSH IDLE TIMER button to set the time delay
between the machine becoming idle and the start of the first
brush cleaning cycle.
15 Touch BRUSH IDLE TIMER for Brush Station #2 Cleaning to
display the
NUMBER PAD
and set the time delay.
16 Enter the desired time in
10
th
of seconds on the
NUMBER PAD
(not
shown), and touch ENTER.
The
BRUSH IDLE TIMER
value
displays on the screen in seconds .
A
NOTE:
If the Brush Idle Timer (Clean) is running and either Brush Station I/O screen
displays, then the BRUSH IDLE TIMER feature is ignored while the screen is displayed.
STANDARD