6
1. Before use, make sure Veggetti
®
Power is on
a clean, flat, dry surface near a power outlet.
2. Make sure main unit is securely positioned on the
tank (See Fig. 1).
3. With the power cord unplugged, select your
desired blade and place it inside the large gear
housing, making sure the top of the blade is level
to the top of the large gear (See Fig. 2).
4. Position and align the feeder on top of the blade
and gear, then twist clockwise to engage and lock
in place.
5. Wash and dry vegetables or fruit to be used.
6. If necessary, trim your food to fit through the
feeder.
CUPS
8
7
6
5
4
3
7. Cut the ends off of your food and gently push
the Veggetti
®
Power press into the flat end,
submerging the cross blade of the press
(See Fig. 3).
8. Make sure feeder is free of any debris. Plug the
Veggetti
®
Power in and press the power switch to
start it (See Fig. 4).
9. Slowly push the Veggetti
®
Power press with fruit
or vegetable into rotating blade (See Fig. 5).
NOTE:
When you reach the end of the fruit or vegetable
and cannot push any further, press the power
switch to turn the Veggetti
®
Power off, then
carefully pull the press out. Remove and discard
the remaining fruit or vegetable.
If the fruit or vegetable gets stuck in the feeder,
turn the Veggetti
®
Power off, unplug the machine
and rotate the feeder counter-clockwise to
unlock and remove it to have easier access to the
remaining fruit or vegetable.
CUPS
8
7
6
5
4
3
2
1
Fig 1
Fig 3
Fig 4
USAGE INSTRUCTIONS: