On-Net Surveillance Systems, Inc.
NetDVR 6.5
Administration
82
•
Specifying Sender Settings
Specify sender information in the following fields:
Note:
SSL (Secure Socket Layer) is not supported; if the sender belongs on a server that requires SSL, the
e-mail alerts will not work properly. Also, you may be required to disable any e-mail scanners that could
prevent the application sending the e-mail alert.
•
Sender e-mail address:
Type the e-mail address you wish to appear as the sender of the e-mail
alert.
•
Outgoing mail (SMTP) server name:
Type the name of the SMTP server which will be used for
sending the e-mail alerts.
•
Server requires login:
Select check box if a user name and password is required to use the SMTP
server.
•
Username:
Field available only when
Server requires login
is selected. Type the user name
required for using the SMTP server.
•
Password:
Field available only when
Server requires login
is selected. Type the password required
for using the SMTP server.
•
Specifying Default Subject and Message Texts
Specify default subject and message texts in the following fields:
•
Subject text:
Specify required subject text for e-mail alerts.
•
Message text:
Specify required message text for e-mail alerts. Note that camera information as
well as date and time information is automatically included in e-mail alerts.
Note:
If e-mail alerts are enabled for the
Viewer
, the content you specify in the
Subject text
and
Message
text
fields will appear as default values in the
Viewer
's dialog for sending evidence via e-mail. Users will be
able to overwrite these default values.
•
Specifying Image and Interval Options
You are able to specify whether e-mail alerts should include images, and how much time should pass
between alerts per camera:
•
Include Image:
Select check box to include images in e-mail alerts. When selected, a JPG image
from the time the triggering event occurred will be attached to each alert e-mail.
•
Time btw. motion-related mails (minutes):
Specify required minimum time (in minutes) to pass
between the sending of each e-mail alert per camera. Note that this interval only applies for e-mail
alerts generated by detected motion; e-mail alerts generated by other events will still be sent out
whenever the events occur.
Examples: If specifying
5
, a minimum of five minutes will pass between the sending of each motion-
related e-mail alert per camera, even if motion is detected in between. If specifying
0
, motion-
related e-mail alerts will be sent each time motion is detected, potentially resulting in a very large
number of e-mail alerts being sent. If using the value
0,
you should therefore consider the motion
detection sensitivity configured for each camera in the
.
