OP-205
AIR NIPPER
INSTRUCTION MANUAL
●
Additional Safety Rules
．
Hold the tool firmly by hand.
．
Keep hands away from the Blades.
．
Don’t touch the blades without shutting air off.
．
Eye protection must be used or safety glasses worn.
●
How to use
．
Connect the external air hose to the inlet fitting (No.15).
．
Adjust the position of lever by turning Valve Set (No.9), according to the job to be done.
(Never turn Valve Set more than 180° degrees).
．
Put a work piece between Blades and push lever (No.13).
●
How to change Blades
Changed blade in the following way:
．
Shut air off--Take Valve Switch (No.22) off by turning to the left.
．
Unscrew pivot pin (No.3).
．
Remove Blades by hand. Insert Spring carefully when installing cutters into Body.
●
How to change O-ring
Worn-out O-Ring can be changed in the following way (No.6):
．
Shut air off.
．
Take Body (No.9) by turning to the left.
．
Pull piston (No.7) out for replacement.
●
Remarks
．
Never attempt to cut without work piece, you will probable ruin blade edge through
such action.
．
Set air pressure at 5~6 kgf/cm
²
(71~85 PSI).
．
Use air tool oil to lubricate.
．
If the blade cannot be opened and closed, can use metal protective oil such as (WD-40)
to remove iron rust.
