
1
2
3
4
5
6
7
8
9
10
11
12
13
14
PRODUCT DIAGRAM
Holder
Suc�on Base
1. Wireless Charger
(Fast Clamping Bu�on)
2. Clamps
3. Clamp Release Bars
4. Tray
5. LED Indicators
6. Steering Knuckle
7. Tray Release Bu�on
8. Micro USB Charging Port
9. Ball Joint
10. Stabilizing Nut
11. Arm Release Bu�on
12. Suc�on Cup Locking Lever
13. Suc�on Cup Tab
14. Angle Adjuster
SPECIFICATIONS
Model
Input (Wireless Charger)
Output (Wireless Charger)
Micro USB Cable Length
Dimensions
Weight
ONA19WI702
5V / 2A
5W Max
91cm / 3�
115 x 109 x 59mm / 4.5 x 4.3 x 2.3in
185g / 6.5oz
FCC Statements
Cau�on: The user is cau�oned that changes or modifica�ons not expressly
approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Opera�on is subject to
the following two condi�ons:
(1) this device may not cause harmful interference, and(2) this device
must accept any interference received, including interference that may
cause undesired opera�on.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protec�on against
harmful interference in a residen�al installa�on. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instruc�ons, may cause harmful interference to
radio communica�ons. However, there is no guarantee that interference
will not occur in a par�cular installa�on. If this equipment does cause
harmful interference to radio or television recep�on, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separa�on between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
FCC Radia�on Exposure Statement:
This equipment complies with FCC radia�on exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and
your body. This transmi�er must not be co-located or opera�ng in
conjunc�on with any other antenna or transmit
The ‘Qi’ symbol is a trademark of the Wireless Power Consor�um.
WIRELESS CHARGING
DASH MOUNT
PRODUCT GUIDE
Model: ONA19WI702
Ver01 12/03/18
Ver01 12/03/18
Ver01 12/03/18
Ver01 12/03/18
Summary of Contents for ONA19WI702
Page 3: ...尺寸 90 127mm 折页 材质 128克铜版纸 ...