Automation
D-8OUT-4IN User Manual
Page 1: ...Automation D 8OUT 4IN User Manual ...
Page 2: ...he time selection mode is selected otherwise the choice is confirmed and the module exits programming 5 If the command chosen was TIME or DELAY the LED will flash the number of times corresponding to the selected time 1 1 second 2 1 minute 3 5 minutes 4 10 minutes 5 15 minutes 6 20 minutes 7 value already stored in memory 6 Now select the time by pressing PROG repeatedly until the green LED flashe...
Page 3: ...lection is made on the respective key 1 to 8 4 Press key 1 2 3 or 4 corresponding to the input you want to associate with the selected output s for 2 seconds Release the key 5 From this moment onwards input 1 2 3 or 4 will control the output s you selected 6 Programming can be done for all desired outputs at once or one at a time Note If a module or command enters programming mode and exits again ...