ADJUSTMENT PROCEDURE-3
VIDEO PROCESSOR CALIBRATION
TX-SR705/SA705
Video processor Q8001 must be calibrated before mounting on the unit.
1. Press and hold down
2. Press
AUX
button within 5 seconds above.
3. Press
ENTER
button.
5. The unit will be powered off automatically when succeeds.
6. If failed, “ Calibration Error ” will be displayed.
Check SG and signal, then return to Item 1.
4. Calibration of ADC part in
FLI8125-LF-BC starts and proceeds.
CD
button, then press
button.
STANDBY/ON
"
Test - _
" is displayed only for 5 seconds.
[Procedure]
[When]
[Preparation]
1. Exchange Video processor IC (Q8001,
FLI8125-LF-BC
).
2. Exchange HDMI PC board ass'y (NAHDM-9107).
1. Prepare a standard video signal generator(SG).
3. Connect the unit(TX-SR705) and SG as shown in the figure.
2. Set the SG to output 100% color bar of 8 colors and 480i at component video terminals.
Component
Video Cable
Component
Video Input
Component
Video output
AV Receiver
Video Signal
Generator
IN1
